What is a Darkglass B7K?
The Microtubes B7K takes the powerful dynamic saturation circuit of the B3K and adds a four-band equalizer and a balanced line driver for even greater versatility. Designed for both studio and live use, it will take your direct sound to a whole new level.
Are Darkglass pedals analog or digital?
Compare to Similar Best Sellers
| This item: Darkglass Alpha Omega Ultra Dual Bass Preamp/OD Pedal with Aux In $ 449 .99 + FREE Shipping 5 reviews | |
|---|---|
| Analog/Digital | Analog (overdrive), Digital (cab sim) |
| Inputs | 1 x 1/4″ (instrument), 1 x 1/8″ (aux in) |
| Outputs | 1 x 1/4″, 1 x XLR (direct out), 1 x 1/8″ (headphones) |
Is Darkglass an analogue?
Top-notch analog bass preamp with a 4-band EQ. The Microtubes B7K takes the powerful dynamic saturation circuit of the B3K and adds a four-band equalizer and a balanced line driver for even greater versatility….Controls.
| Analog/Digital | analog |
|---|---|
| Power | 9V |
Are Darkglass pedals digital?
Digital volume control is available in Darkglass Suite. Headphone volume can be controlled directly on the pedal with the master volume control when the preamp is enabled. When the pedal is on bypass, the master volume does not affect the headphone volume.
Should I use a bass preamp?
Without using a preamp, your bass can sound thin and flat. A bass preamp unit is useful for achieving a specific tone or gain structure before the signal reaches the amp or audio interface. It allows you to carry your perfect tone with you on stage and deliver it to both the PA and backline.
Are Darkglass pedals analog?
Darkglass pedals are all about analog bass overdrive and distortion.
What is the purpose of a bass preamp?
Bass preamp pedals are employed for both live and studio scenarios. Acting as a go-between for your bass guitar and a mixing desk/audio interface, a bass preamp pedal allows you to plug directly into a PA system or computer with convincing tone.
Do I need a DI box for my bass?
It’s a good idea for gigging or recording guitarists. Even better for bassists and acoustic players. If you gig a lot or do a lot of studio recording, you should have a good DI box. It’s a good idea for electric guitarists; it’s an even better idea for bass guitarists and acoustic guitarists.
Should I use a preamp for bass guitar?
A bass preamp, or bass pre, only slightly amplifies your bass signal. The signal from your bass is pretty weak. Try plugging in a pair of headphones directly into your bass’ output jack and you will barely hear it. The preamp will raise the input signal to line level.
What does DI box do for bass?
What does a DI box actually do? A DI box, such as the SansAMP Bass Driver DI or the SansAMP Character Series VT Bass DI (both noted above), provides electrical ground isolation between input and output, and matches impedance of the source to the load.
Whats the difference between a preamp and a Di?
A DI box changes your high impedence, instrument level bass signal to a low impedence mic level signal. This allows you to use a microphone preamp to boost your signal to balanced line level. This is what amps/recording devices want to see.
How do you use a bass pre amp?
Does a bass need a DI box?
What makes the Darkglass electronics microtubes b7k unique?
Featuring a hybrid JFET/CMOS gain circuit design, a four-band EQ with minute control for low mids and high mids and boost/attack switches for adding volume while also controlling bite and treble, the Darkglass Electronics Microtubes B7K is an expansive overdrive built to emulate the warmth of vintage bass tube amps.
Why choose Darkglass electronics?
“Darkglass has refined the art of integrating tone INTO your sound as opposed to a synthetic feeling layer on top. Their products represent a new level.” “The people at Darkglass Electronics must be bass players, because it’s the first time I’ve used a drive pedal that not only sounds right, it FEELS right.”
Why should I buy the b7k?
Able to dial in classic bass overdriven sounds from Ampegs to Plexis while also housing enough tweakability to easily create your own sound, the B7K is an essential staple in any rig where the utmost in quality and versatility is needed.
What power supply do I need to power the microtubes b7k?
The Microtubes B7K has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.