What is the shortcut key for BIOS setup?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

What do the F keys do on startup?

F8. The F8 key is commonly used before a Windows PC starts to let you access advanced startup modes – you may have to press it a few times for it to work. That’s where you’ll find the option to start Windows in Safe Mode. It can also be used to access the ‘Find and Replace’ window in Windows’ TextPad app.

What is BIOS key for Dell?

To access the BIOS or UEFI (also called System Setup) on a Dell computer: Press the F2 key several times at the Dell logo screen during startup. Or, press the F12 key several times at the Dell logo screen during startup and select BIOS Setup or System Setup from the menu.

What is F9 key used for?

F9 is shorthand for “Fine,” which is sometimes used in chat communication. 2. The F9 key is a function key found at the top of almost all computer keyboards. The key is most often used to open Mission Control on an Apple computer.

What key do you press to access BIOS setup?

Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST).…

Use the following keyboard keys to navigate the BIOS Setup Utility:…

Navigate to the item to be modified.…

Press Enter to select the item.…

Use the up or down arrow keys or the+or – keys to change a field.

How to boot into BIOS on Dell?

Go to PC Settings,press the Windows+I key.

On the left side,select General.

Under the Advanced startup section,click Restart now.

The computer will reboot into the advanced startup menu.

Click Troubleshoot.

Click Advanced options.

Select UEFI Firmware Settings.

Click Restart to restart the computer and enter UEFI (BIOS).

How do you get into Dell BIOS?

Tap F2 key at the Dell logo screen to enter System Setup or BIOS.

On the left pane,click Boot Sequence.

Boot mode should be selected as UEFI (not legacy) within the BIOS go to the General > Boot Sequence then click Apply.

Check that Secure Boot is set to Disabled.

How to enter BIOS setup?

Click the Start menu and select Settings.

Click Update&security.

Click Update and recovery.

Select Recovery from the left column,then click Restart now.

Once the boot menu appears,select Troubleshoot.

In the Troubleshoot menu,select Advanced options.

In the Advanced options menu,click UEFI Firmware Settings.

Click Restart.