How do I setup my Linksys WRT54GS router?

How do I setup my Linksys WRT54GS router?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

What is the latest firmware for Linksys WRT54GS?

Linksys Wireless-G Broadband Router WRT54GS Firmware 7.50. 8 Download | TechSpot.

How do I factory reset my WRT54GS?

3. How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release. Alternatively, use the web-based setup page, go to Administration tab > Factory Defaults sub-tab and click the Restore Factory Defaults button.

How do I update my Linksys router firmware?

  1. Log in to your Linksys server account.
  2. Under the Firmware Update section under the Basic tab, click Check for Updates.
  3. Once the router detects a firmware update, you will be able to download and install the firmware on your device.
  4. On the Update firmware pop-up box, click Yes.
  5. A Router Reboot screen will pop up.

How do I reset my Linksys wrt54g router username and password?

Use the following steps to reset the router using this method:

  1. Open your Web browser and enter the IP address of your router.
  2. Enter your user ID And password when prompted.
  3. At the top of the Web page, click “Administration” and then “Factory Defaults”.
  4. Beside “Restore Factory Defaults”, click “Yes”.

Is Linksys WRT54G outdated?

With Internet speeds increasing beyond 100 megabits, sometimes even to 1 gigabit, the Linksys WRT54G is obsolete in those cases. You’re wasting money on the faster Internet speeds.

How to set up WRT54GS as a repeater?

Installing DD-WRT. As of June 2007,DD-WRT beta v24 firmware is the only version that works in repeater mode. You can download it here.

  • A word about “bricked” routers. A “bricked” router is a malfunctioning router.
  • Setting up the repeater mode. A very good guide by Aaron Weiss with step by step instructions and screen captures is provided here.

    • How to configure Linksys WRT54G wireless router?

    Log In Visit the Web address 192.168.1.1 in any Web browser on a computer connected to the router.

  • Open Wireless Settings Image Credit: Image courtesy of Linksys Open the Wireless tab in the router’s setup interface.
  • Name the Network Image Credit: Image courtesy of Linksys Pick a name — SSID — for your wireless network.
  • Set Up Security

    • How can I put the WRT54G into bridge mode?

    Wireless Mode: Client Bridge

  • Wireless Network Mode: Match your primary router.
  • Wireless Network Name (SSID): Match your primary router. (case matters!)
  • Wireless Channel is not relevant in Client Bridge mode.
  • Wireless SSID Broadcast is not relevant in Client Bridge mode.
  • Click “Save Settings”. The router will now be in Client Bridge mode.

    • How to update Linksys router firmware WRT54G?

    Open any web browser (Internet Explorer or Safari). Enter your router’s IP address in the Address bar,then press[Enter].

  • Enter “admin” in the Password field then leave the User name blank.
  • Click on the Administration tab > Firmware Upgrade sub-tab.