What are live edge slabs worth?

Unfinished live edge wood slabs average about $20 per board foot, for example, which is a wholesale price by current market standards.

What is the best wood for live edge?

But back to what is the best wood for live edge furniture. The most stable is old-growth Redwood within the USA, but Black walnut, Cherry, and Claro walnut are also great options. Oaks, whether red, white, or black oak, are also options and sycamore and maple.

How are wood slabs priced?

WOOD SLABS PRICING Now that you have the number of board feet in the wood slab, you can use the price per board foot to calculate your cost; meaning that if the wood seller offers the wood at $20/bf, based on the above calculations, your cost would be: 30 bf x $20/bf = $600 for the wood slab.

Are live edge slabs kiln dried?

“We typically air dry our slabs for at least one summer before we put them in our kiln. Then our kiln batch for these thick slabs run another 3-5 months even after the air drying.

Why are live edge wood slabs so expensive?

Live edge products are more expensive than regular cuts of wood because they are so unique and labor-intensive. They cannot be made in bulk since each slab is cut at the same length as the log. Every live edge piece is distinctive, blending aesthetic with practicality.

How thick should live edge slab be?

at 1.5” minimum for smaller pieces and ideally 1.75 or more for wide pieces. Most dining or conference tables we make land somewhere between 1.75” and 2.25” finished.

How thick should live edge be?

The thinner the wood is milled means the greater the likelihood that your live edge table will be prone to warping and twisting. A reputable sawmill should be milling live edge slabs no less than three inches in thickness in order to account for the expected changes that occur in the wood during the drying process.

How much does it cost to build a live edge table?

The most common question we get is “how much will a table like this cost me?” So we’re here to give you the answer. For a large live edge dining table, you’ll most likely spend $1500-$10,000. This will vary based on how large the table is, whether or not you want to use epoxy on your table, the finish type, and labor.

Do you remove bark from live edge?

How To Remove The Bark on Live Edge Slabs. Removing the bark on a live edge slab is a pretty simple process. We typically use a small chisel and hammer and angle the chisel with the way the live edge tapers. After all of the big pieces are removed, you can sand the rest until your edge has a smooth surface.

How long does a live edge slab take to dry?

For this one inch lumber, green-to-dry kiln time is typically 5-6 weeks, or 35-45 days. So based on the prior paragraph a theoretical drying time for 2 inch thick wood should be closer to 140-180 days, or close to half a year.

How do you keep the bark on a live edge slab?

Pour over epoxy resin is your best bet to hold the bark in place if you plan on keeping it. Polyurethane would be another option, but won’t be quite as strong. Oils and waxes seal the wood, but they aren’t going to serve as an adhesive like epoxy would to keep the bark in place.

Do you stain live edge wood?

To beautify the wood, use an oil-based stain, such as Minwax Wood Finish. The colour you choose is a matter of personal preference. You can go dark for an elegant, modern look, or choose a natural stain that simply enhances the existing appearance of the wood.

What are live edge slabs made of?

All Live Edge Slabs are Kiln dried and sold in the Rough . Our Slabs are cut from select logs, we typically are looking for a larger than normal diameter and try to find logs that have something interesting in them in order to make the slab more appealing. Most of the slabs are cut 10/4 thick.

What are kiln dried live edge slabs?

Kiln dried live edge slabs are typically used for making furniture such as dining room tables, desks, shelves, bar tops, coffee tables, countertops, and more. We have a huge inventory of kiln dried live edge slabs ready to ship for your next project.

How thick are the slabs of a log?

Most of the slabs are cut 10/4 thick. We will sometimes cut them 9/4 or 8/4 and often take 5/4 off the outside of the log in order to get down to a wide enough face to start taking the slab. If you don’t see what you are looking for here please give us a call at 570-724-1895.

What kind of wood do you offer for slabs?

If it doesn’t grow here, we don’t have it! We offer wood slabs in black walnut, maple, sycamore, red oak, white oak, cherry, poplar, box elder, catalpa, eastern white pine, white cedar, red cedar, spruce, and many more, all based upon current supply and log inventory.